The first place Id look is the output bandswitch contacts. Check
continuity from the pi net side of the plate blocking cap to the Load
cap.
Since there are no input relays, very little goes wrong there but its
the next place to check with the Ohmeter.
Carl
KM1H
----- Original Message -----
From: "Keith Hamilton" <tuner@zoominternet.net>
To: <amps@contesting.com>
Sent: Monday, March 02, 2009 11:36 AM
Subject: [Amps] AL-80B trouble
>I have an AL-80B that does not work on 40 meters. When I try to
>transmit
> my exciter shown infinate SWR and of course will not put out any RF.
> All
> other bands are OK. I will send it to Ameritron if necessary but is
> there something simple I shoud look for?
> Thanks for any help! 73
> Keith Hamilton W8GX
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|