On 5/3/2017 3:23 PM, Bill Turner wrote:
> One intriguing possibility with these is direct coupling (through an
> LP filter and DC isolation of course) to 50 ohm coax
Only on 160 meters for 750 Watts output. By the time one gets to 27
MHz the optimum output impedance is down around 5 Ohms ... it would
be a real trick to design a broadband output. The best approach might
be impedance matching in the output filters for each "band".
73,
... Joe, W4TV
On 5/3/2017 3:23 PM, Bill Turner wrote:
For those interested, MIcrosemi has a line of relatively high voltage
RF MOSFETs:
https://www.microsemi.com/existing-parts/parts/81771
One intriguing possibility with these is direct coupling (through an
LP filter and DC isolation of course) to 50 ohm coax. No transformer
needed.
Something to think about.
73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|