Where on earth did you get that idea from? Or are you maybe confusing RTTY
with the various digital modes?
Carl
KM1H
----- Original Message -----
From: "David Jordan" <wa3gin@comcast.net>
To: "Don Jones" <ko7i@comcast.net>; <Amps@contesting.com>;
<barockteer@aol.com>; <km1h@jeremy.mv.com>
Sent: Wednesday, August 28, 2013 8:30 AM
Subject: Re: [Amps] AL-1200 and RTTY - JUST A SIMPLE ANSWER PLEASE!
... and doesn't running the legal limit in RTTY mode defeat the purpose of
the mode, which is that with RTTY you can work the world with as little as
100 watts. Relatively easy to do when compared to running the same power
on SSB.
enjoy,
dave
wa3gin
----- Original Message -----
From: "Don Jones" <ko7i@comcast.net>
To: <Amps@contesting.com>; <barockteer@aol.com>; <km1h@jeremy.mv.com>
Sent: Tuesday, August 27, 2013 11:33 PM
Subject: Re: [Amps] AL-1200 and RTTY - JUST A SIMPLE ANSWER PLEASE!
Tony,
This is a pretty simple to figure out once you get out of the linear
units mentality and switch over to the darkside of Log Units.
Traditionally +/- 1 "S" unit = +/- 6dB change in received signal
strength.
At 1,500W a 6dB reduction in power = 375W.
A 6dB increase in power from 1,500W = 6,000W
1,000W is 1.8 dB down from 1,500W
750W is 3.0 dB down from 1,500W
Bottom line with a small reduction in output power the result on
receiving side is minimal, but the reduction in wear and tear on your
amplifier is significant.
This is about as simple and straight forward as it can get. The advice
that Carl KM1H has given you is spot on.
Vy 73, Don KO7i
Message: 2
Date: Tue, 27 Aug 2013 09:52:55 -0400
From: "Carl"<km1h@jeremy.mv.com>
To: "Tony Brock-Fisher"<barockteer@aol.com>, <Amps@contesting.com>
Subject: Re: [Amps] AL-1200 and RTTY - JUST A SIMPLE ANSWER PLEASE!
Message-ID: <A70361803BA54AC3A52CA33AF3486D2B@computer1>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=response
You will be safe at 1000W if the blower is set to high speed (depending
upon
the vintage of the amp), is clean, oiled as well as clean tube fins.
With a well used tube keep it down at 750W.
Carl
KM1H
Message: 1
Date: Tue, 27 Aug 2013 08:48:04 -0400
From: Tony Brock-Fisher<barockteer@aol.com>
To:"Amps@contesting.com" <Amps@contesting.com>
Subject: [Amps] AL-1200 and RTTY - JUST A SIMPLE ANSWER PLEASE!
Message-ID:<521CA004.8010306@aol.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
I want to know what is a reasonable power level for the AL-1200 in a
RTTY Contest.
Yes, I know I can search the archives. I tried that and it's impossible
to sort through all the bull$#!^ posts.
I'm going to open my station up for a RTTY contester guest op. Make your
own reasonable assumtions about duty cycle.
Please give me just a number of watts output I should limit the amp to.
I'll take the low side average of all responses.
Fire away please...
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1432 / Virus Database: 3211/6114 - Release Date: 08/27/13
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|