> I recently bought an "as is" Heathkit HA - 10 Warrior. The amp is in good
> overall condition, but I'm having a problem that has me stumped. Here is a
> little background........ The amp has relays installed for transmit / receive
> switching and standby bias switching. The standby bias is around -75v and
> the
> bias during transmit is -7v. The plate current is around 30 ma with the
> cutoff
> bias applied which is normal.
Forgive my ignorance about this amp, but 30mA with 75V of cutoff
bias is 'normal'? Where is it going?
I concur with the other comments about likely faults - but I'd add
a question as to whether the current meter is telling the truth.
Steve
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|