Gary...
You will see only 10 dB gain at 2500V...so about 1000W out for 100W in.
Plate current can swing to 1A, but you may not be able to get it much
above 800 mA. Grid current can get very high compared to an 8877, you
may see as much as 200 mA.
Here's a bunch of operational data
http://www.nd2x.net/tube-ops.html
Note that nobody on that list runs them at only 2500V. If you were in a
Russian tank, it might be a good idea, but for hams the tubes don't
really start to operate well until the plate voltage gets above 3500V.
Ignore the whiners about data sheet specifications.
jeff, wa1hco
Gary Schafer wrote:
> Playing with a GS35B on HF.
> what kind of grid current should I see with 2500 volts on the plate?
>
> How much power out do you see with that kind of plate voltage?
> How much plate current?
> With 100 watts drive.
>
> Thanks
> Gary K4FMX
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|