Hi Larry,
Yes, indeed they are 100 ohm, 2W, carbon composition. Carbon
composition resistors are hard to find. Ceramic composition resistors
are a good substitute. I just ordered some myself from Mouser - they're
Ohmite P/N - OY101KE. I doubt the diameters will be the same. The
stock suppressor coils had 6 turns of 16 or 18 AWG on the resistor
body. I think 4 turns of 1/2 inch diameter is pretty close. I used 14 AWG.
Good luck & 73, Tim, W2UI
On 3/12/2010 4:33 PM, Larry wrote:
> I have cleverly filed my Clipperton-L doc. I am hoping someone can help. The
> parasitic
> suppressor resistors have broken. I believe they are 100 ohm 2W composition.
> Can
> anyone confirm the value? I am not sure what caused the breakage at this
> point.
>
> 73, Larry W6NWS
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|