I thought of that and tried to figure out how, but I think it can't. However,
you can
probably use some kind of graphics program to invert it. In order to get a
graphic file,
though, I had to print on paper and then scan the result!
On 8/21/2010 11:16 AM, Radio WC6W wrote:
> Hi Vic,
> Can that program print "sdrawkcab" so that the text may be protected under
> the clear?
>
> 73& Good morning,
> Marv WC6W
>
> http://qsl.net/wc6w/
>
>
> --- On Fri, 8/20/10, Vic K2VCO<vic@rakefet.com> wrote:
>
>> From: Vic K2VCO<vic@rakefet.com>
>> Subject: Re: [Amps] Labeling panels
>> To: "Amps reflector"<amps@contesting.com>
>> Date: Friday, August 20, 2010, 5:15 PM
>> This program is great! I spent about
>> an hour and have some very nice designs, including
>> ones for the bandswitches. As soon as I get the decal
>> paper, I'll be all set.
>>
>> On 8/20/2010 5:50 AM, Alan Ibbetson wrote:
>>> I've used the Front Panel Designer free software
>> package for creating
>>> panel labels.
>>>
>>> http://www.frontpanelexpress.com/download/front-panel-designer/index.html
>>>
>>> Radial tick marks for rotary controls can be made with
>> the "Line"
>>> object, which has thickness and rotation attributes as
>> well as length.
>>> The front panel image can be printed straight to water
>> decal paper. Of
>>> course for this application you are unlikely to be
>> contacting the
>>> vendor to have a panel engraved.
>>>
>>> Doubtless there another zillion ways to skin this
>> cat.
>>>
>>> 73,
>>>
>>> Alan G3XAQ
>>
>> --
>> Vic, K2VCO
>> Fresno CA
>> http://www.qsl.net/k2vco/
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>>
>
>
>
--
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco/
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|