Amps
[Top] [All Lists]

Re: [Amps] Corian for HV insulators?

To: amps <amps@contesting.com>
Subject: Re: [Amps] Corian for HV insulators?
From: Al Kozakiewicz <akozak@hourglass.com>
Date: Thu, 22 Mar 2012 16:14:00 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
It's an acrylic.  Certainly far less brittle than ceramic.  More brittle than 
polycarbonate.  Hard for me to think of anything that can be thermoformed at a 
reasonable temperature (150 C) as brittle.

Al
AB2ZY

________________________________________
From: amps-bounces@contesting.com [amps-bounces@contesting.com] On Behalf Of 
ZL2AAA [zl2aaa@paradise.net.nz]
Sent: Thursday, March 22, 2012 4:05 PM
To: Randall, Randy; audioguy@q.com
Cc: amps
Subject: Re: [Amps] Corian for HV insulators?

Is this the same stuff they use for bench tops.Rather brittle and Expensive/


----- Original Message -----
From: "Randall, Randy" <Randy.Randall@uchealth.com>
To: <audioguy@q.com>
Cc: "amps" <amps@contesting.com>
Sent: Friday, March 23, 2012 2:21 AM
Subject: Re: [Amps] Corian for HV insulators?


> My question is:
>
> What is your source for scrap Corian?  I can't find a source.  I have
> approached installers and they never have any.  "It's too expensive to
> have scrap.  We measure 5 times and then one more before we cut."
>
> Thank you,
> Randy.
>
> Randy E. Randall AB9GO
> Network Engineer
> UC Health
> 3200 Burnet Ave.
> Mail Stop 4610
> Cincinnati, Ohio  45229
> Ph. 513-585-7146
> Fax 513-585-7159
> ________________________________________
> From: amps-bounces@contesting.com [amps-bounces@contesting.com] On Behalf
> Of Jim Barber [audioguy@q.com]
> Sent: Wednesday, March 21, 2012 3:45 PM
> Cc: amps
> Subject: Re: [Amps] Corian for HV insulators?
>
> Corian machines well and isn't too
> expensive when bought as scrap, so it's worth finding out.
>
> Confidentiality Notice: This e-mail message, including any attachments, is
> for the sole use of the intended recipient(s) and may contain confidential
> and privileged information.  Any unauthorized review, use, disclosure or
> distribution is prohibited. If you are not the intended recipient, please
> contact the sender by reply e-mail and destroy all copies of the original
> message.
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>