On Sep 3, 2004, at 1:51 PM, Will Matney wrote:
Another idea I thought of for tubular coils, to keep them super cool,
would be to terminate one end through a hollow insulated standoff into
a pressurized chassis. This would force air through the tubing itself
and out the other end the same as the blower forcing air through the
fins on a tube. Just a thought =)
When a pressurized chassis is used, another method is to drill a grid
of small holes c. 20mm apart in the chassis directly under the
inductor so that pressurized air cools it during Tx.
Richard L. Measures, AG6K, 805.386.3734. www.somis.org
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|