I'm looking at the drive not being ON FULL and low watts in, hey it'll coast at
1500 if I do all this right
which is what I was shooting for in the first place, that alpha key down
advertisement long ago got me thinking.
I have also email here from a year ago about me deciding what I needed for a
gu-84b tube and lots of folks wrote back saying 3.5-4 was a "good working
voltage" for this tube. there just wasn't enough info on it and I HAD ONE
INEXPENSIVELY! Plate voltage is no issue as I am the sales rep for magcap but
its work I didn't want to do at this point.
will see what shakes out, I also have a cantenna I built oil filled and I have
the mfj 1500w tuner with a dummy load in it, I don't intend on seeing "what
the thing will do" boiling off oil and making flames!!!
I did however get questions answered on the ORIGINAL question I had asked.
thanks for your inputs. I'm going along the correct track as I thought.
de ka1mwp
________________________________
From: amps-bounces@contesting.com on behalf of Larry Carman
Sent: Mon 2/27/2006 7:44 PM
To: Partain, Chuck
Cc: amps@contesting.com
Subject: Re: [Amps] figuring tube output impedance
With 3900 watts you can fry tasty chicken in the dummy load if you use
vegetable oil. Think the FCC would fall for that one???
... I actually had a dummy load filled with vegetable oil. Worked ok but oil
gummed up around the heated metal contact points after a while.
Regards,
N5BIP
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of Partain, Chuck
Sent: Monday, February 27, 2006 2:41 PM
To: Bill Turner; amps@contesting.com
Subject: Re: [Amps] figuring tube output impedance
yea they're going to love me.
and I guess with that line of thinking, I should drive home doing 145 in the
40.
-----Original Message-----
From: Bill Turner [mailto:dezrat@copper.net]
Sent: Monday, February 27, 2006 3:37 PM
To: Partain, Chuck; amps@contesting.com
Subject: Re: [Amps] figuring tube output impedance
ORIGINAL MESSAGE:
At 10:36 AM 2/27/2006, Partain, Chuck wrote:
>I run 3.9kv and I'm GUESSING 2 amp.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I'm GUESSING the FCC will be very interested in your amp.
Even at a lousy 50% efficiency that is 3900 watts output.
Bill, W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|