smells fishy to me.
-----Original Message-----
From: Gary Smith [mailto:wa6fgi@sbcglobal.net]
Sent: Tuesday, February 28, 2006 1:03 PM
To: Partain, Chuck; Larry Carman; HAROLD B MANDEL
Cc: amps@contesting.com
Subject: Re: [Amps] Vegetable oil dummy load
Although this sounded silly (to me) at first, I had heard of using a dummy
load for 160 mtr contacts. Doubting this would work, I hoisted the dummy
load up forty feet or so in the air and worked more contacts than I would
have ever imagined with a 1:1 swr across the 160 band. However, my dummy
load had xfrmr oil in it, needless to say there was no "finger lickin'
good" aroma in the air.
73,
Gary...wa6fgi
----- Original Message -----
From: "Partain, Chuck" <Chuck_Partain@maxtor.com>
To: "Larry Carman" <lncarman@swbell.net>; "HAROLD B MANDEL" <ka1xo@juno.com>
Cc: <amps@contesting.com>
Sent: Tuesday, February 28, 2006 6:22 AM
Subject: Re: [Amps] Vegetable oil dummy load
> good portable antenna AND it'll make you hungry for Mcdonalds fries at
> some point :)
>
> -----Original Message-----
> From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com]On
> Behalf Of Larry Carman
> Sent: Tuesday, February 28, 2006 9:20 AM
> To: 'HAROLD B MANDEL'
> Cc: amps@contesting.com
> Subject: Re: [Amps] Vegetable oil dummy load
>
>
>
> The cantenna I was using was a makeshift for testing a 3cpx5000a7
> homebrewed
> amp I had constructed. I used 3 gallons of veggie oil in a plastic storage
> container. I drown nine, 18" long carborundum resistors in the oil and
> covered the container with a thick aluminum plate. I could only test to
> 2500
> watts output because of the bird 2500 watt element limitation. But, I
> could
> test for a long, long time.
> With the dummyload lying on the concrete floor in the garage, I figured
> it wouldn't radiate very well. One morning I forgot to switch from the
> dummyload to the trapped 40/80 inverted vee and ended up QSOing a friend
> 200
> miles away on 75 mtrs with S9 signal.
> The veggie oil works pretty good for a while but tends to
> gum up at hot points. This might be remedied by putting some type of
> pump/circulator inline. Seems like lots of trouble for a dummy load but
> the
> veggie oil is available locally at about 1/4 the cost of mineral oil. I
> have
>
> no idea what the flash point is for veggie oil. Could be dangerous.
>
> Larry N5BIP
>
> -----Original Message-----
> From: HAROLD B MANDEL [mailto:ka1xo@juno.com]
> Sent: Tuesday, February 28, 2006 6:54 AM
> To: lncarman@swbell.net
> Subject: Re: [Amps] figuring tube output impedance
>
> Hi Larry,
>
> Remember 2 years ago when I was in a hotel in NJ and tried out
> one of them tetrode Emtron DX-3's?
>
> I used a Cantenna, too, and it got so hot in a few seconds of tuning
> the steam was coming out the escape hole: "TSSSSST!"
>
> Too bad it had a power supply with 18% sag on key down.
>
> Imagine what a great amp it would be if the designers didn't
> cut corners on everything?
>
> I'm a-building another amp in my hotel room these days. The outboard
> supply is meant to be desktop, but I can't lift it hardly
> anymore and the covers and panels aren't even on yet!
>
> I started with an Alpha 76 husk and put in some 3CPX800A7's with
> elevated plate voltage and ampacity. The PSU is rated at
> 2 amperes CCS. BOOM!
>
> Hal
> W4HBM
>
> On Mon, 27 Feb 2006 18:44:42 -0600 "Larry Carman" <lncarman@swbell.net>
> writes:
>>
>> With 3900 watts you can fry tasty chicken in the dummy load if you
>> use
>> vegetable oil. Think the FCC would fall for that one???
>> ... I actually had a dummy load filled with vegetable oil. Worked ok
>> but oil
>> gummed up around the heated metal contact points after a while.
>> Regards,
>> N5BIP
>>
>> -----Original Message-----
>> From: amps-bounces@contesting.com
>> [mailto:amps-bounces@contesting.com] On
>> Behalf Of Partain, Chuck
>> Sent: Monday, February 27, 2006 2:41 PM
>> To: Bill Turner; amps@contesting.com
>> Subject: Re: [Amps] figuring tube output impedance
>>
>> yea they're going to love me.
>>
>> and I guess with that line of thinking, I should drive home doing
>> 145 in the
>> 40.
>>
>>
>>
>> -----Original Message-----
>> From: Bill Turner [mailto:dezrat@copper.net]
>> Sent: Monday, February 27, 2006 3:37 PM
>> To: Partain, Chuck; amps@contesting.com
>> Subject: Re: [Amps] figuring tube output impedance
>>
>>
>> ORIGINAL MESSAGE:
>>
>> At 10:36 AM 2/27/2006, Partain, Chuck wrote:
>>
>> >I run 3.9kv and I'm GUESSING 2 amp.
>>
>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> I'm GUESSING the FCC will be very interested in your amp.
>>
>> Even at a lousy 50% efficiency that is 3900 watts output.
>>
>> Bill, W6WRT
>>
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>>
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>>
>>
>
>
> Harold Mandel
> Superintendent of Construction
> Baran Telecom Inc.
> 606 - 205 - 0172
> hmandel@barantelecom.com
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|