On 02/03/14 10:24, Jim W8ZR Garland wrote:
This raises an interesting issue. How does one reduce the impeller speed on
a blower with a 120 VAC motor (capacitor start)? I've done some tests on
several blowers (3370 rpm) and find the rpm doesn't vary appreciably as the
voltage is varied over a significant range. Once the voltage gets low
enough, of course, the blower stalls, but the rpm doesn't vary with the
voltage. I suspect this is an inherent property of induction motors. I first
discovered this effect years ago when I tried to reduce the blower speed of
a Rotron blower in an 8877 amp. I switched in a 24V transformer to lower the
voltage from 120V to 96V, but discovered it didn't make much difference.
You simply restrict the intake air flow which unloads the motor.
--
Ron KA4INM - Youvan's corollary:
Every action results in unwanted side effects.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|