ORIGINAL MESSAGE: (may be snipped)
On 2/6/2014 3:39 PM, Dennis W0JX wrote:
The two critical components are the plate tuning capacitor which needs to be
much smaller in minimum capacity and the plate coil.
REPLY:
Actually, you can use the existing tune and load caps if you add the
L-network coil as described in any recent ARRL handbook in the
amplifiers chapter. I did that with my SB-1000 and it works perfectly.
You do have to wind a new coil. I can send pictures if anyone wants. The
pix will have to be off the reflector because images are not allowed.
Email me direct at dezrat1242@wildblue.net
73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|