Interesting. This one does have the HV.
On 3/11/2014 1:00 PM, Louis Parascondola wrote:
The Japanese model of the TL-922 does not go into the SSB Hi voltage mode.
If you want more power out of it you need to go in and connect up the HI
tap on the transformer. I ran into this probolem and it was then I
relaized it was a Jap model. Check tha out and see. Maybe someone
already did it.
It is a Japanese model -- you can set it up for 200-240 V but not 120, and
> it came with 10 meters installed. I wonder if they are different in any
> other way?
-----Original Message-----
From: Carl [1]<km1h@jeremy.mv.com>
To: Vic Rosenthal [2]<k2vco.vic@gmail.com>; amps [3]<amps@contesting.com>
Sent: Tue, Mar 11, 2014 1:23 pm
Subject: Re: [Amps] Pi-L Network Question
All TL-922's are that way since the JA's did not have the low end of the
band when built. I started working them up around 1970 if I remember in the
80's.
Carl
KM1H
--
73,
Vic, K2VCO
Fresno CA
[4]http://www.qsl.net/k2vco/
References
1. mailto:km1h@jeremy.mv.com
2. mailto:k2vco.vic@gmail.com
3. mailto:amps@contesting.com
4. http://www.qsl.net/k2vco/
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|