Hello all,
Thanks to everyone for the informative responses. Although I've now got
more info to use in order to figure out what I am going to do, I'm not
sure what that will be.
It's really just a bit 'hot' for my needs and if I turn it down with a
variac, regulation may suffer. I do have a stack of two variacs on a
common shaft, and although they are large, I don't know what their
actual specs are. Something for me to check.
73 de Steve, NR4M
On 7/21/2015 03:03 , Steve Bookout wrote:
Hello all.
Question for the experts.
How does using a Variac to control the output of a HV transformer
affect things like efficiency?
I think it would be reasonable to think that a transformer operated at
less than rated input voltage would be less efficient than one run at
full primary voltage. I mean, it cost 'something' just to make a
transformer act like a transformer.
I ask because I have a perfectly fine 'pole pig' transformer rated at
5 KVA. 7200 AC volts on the output (reversed) is a bit much for my
needs, so was wondering what the trade-off would be if it were run at
considerably less than 220 input.
I can see this is a better xformer for a 4cx10000, than anything I
would be using, but I have what I have.
73 de Steve, NR4M
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|