I also have a Tek 465 and it works great. I have another though less common
scope the Philips/Fluke 3350A 60Mhz 100MS/s that is both an analog AND a
digital scope. It is convenient to use the measurement functionality of the
digital then swap back to the real time analog. I paid $80 for it at the
Hamfest working. Make sure that the one you get is working as there is NO
support from Fluke on parts.
Randy
Randy E. Randall AB9GO
Network Engineer
UC Health
Randy.Randall@UCHealth.com
Phone 513-585-7146
Fax 513-585-7159
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of Melvin Nichols
Sent: Tuesday, June 26, 2012 8:04 PM
To: amps
Subject: [Amps] Oscilloscope Purchase
A little off topic, but I want to check the timing of my amp relays. I have
been looking at purchasing a used scope for this and general repair on my
equipment. I have been looking at a 2-channel, 100-200Mhz type. What would be a
good model for this purpose?
Thanks, 73
Mel, NZ0O
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
Confidentiality Notice: This e-mail message, including any attachments, is for
the sole use of the intended recipient(s) and may contain confidential and
privileged information. Any unauthorized review, use, disclosure or
distribution is prohibited. If you are not the intended recipient, please
contact the sender by reply e-mail and destroy all copies of the original
message.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|