On Jan 28, 2006, at 6:46 AM, Ian White GM3SEK wrote:
> Mike Bondarev wrote:
>> Thanks to all of you for your comments. GU-84B need 147CFM and GU-78B
>> need 165CFM airflow. But this is for full power plate dissipation
>> continuous key down. In SSB and CW you can have less. So I'll look for
>> Dayton 2C647, 4C006 and 4C446. I hope the quality of this blowers is
>> good for long time operations.
>>
> Remember that American blowers are rated for 60Hz supplies, and will
> give much less air output on European 50Hz supplies.
Good point. DC brushless is the way to go.
>
>
> --
> 73 from Ian GM3SEK
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
Richard L. Measures, AG6K, 805.386.3734. www.somis.org
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|