I want to thank you for your replies for my problem.It turned out to be
something such an easy one to fix once the problem was seen.
I had removed the cover and started tracing the path. Doing so as I touched the
probe to the input RCA jack, the wire from it to the relay moved with the
probe! Apparently the solder had a life span and it had been surpassed.
Soldering pencil and a little heat and fresh solder and it is fixed.
Now my amp. can resume it's normal day to day operation, sitting on the
operating table holding it down in case of high winds and waiting for its call
to duty when a P5 or the two B's ever get on.Thanks again for the good replies
you sent.73,Kathy w2nk
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|