Availability is probably going to be the problem....
Check with Ten-Tec....if they no longer use them...ask for a
recommendation.
Check with Henry Radio....they still have screw terminal lytics.
Recently I serviced a Henry 3KD with screw terminal caps from Henry.
73
David Harmon
K6XYZ
Sperry, OK
-----Original Message-----
From: Amps [mailto:amps-bounces@contesting.com] On Behalf Of Steve NR4M
Sent: Friday, October 10, 2014 12:43 PM
To: Amps
Subject: [Amps] Source for replacement PS caps
Hello all,
Figured it was time to re-cap the PS for my Ten-Tec since they are about
25 years old. The amp hasn't been used in a while so you just know what
will happen if I DON'T re-cap it before I use it.
I really don't want to change (mechanically) the way the originals are
mounted in order to use a different, possibly more available, cap.
Looking for suggestions on sources other than the 'usual' (Digikey,
Mouser,
etc...)
These caps are 400 MFD x 450 VDC, 85 degree, with screw terminals on top.
Terminals appear to be #10, with a 1/2 inch spacing. Dia is 1 3/8 inch
and
length is 5 5/8 inches, or so.
100 degree would be nice and the capacity can be +/-.
Any input would be helpful. I just don't want to pay $25 per cap if I can
find similar for $15.
--
73 de Steve, NR4M
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4765 / Virus Database: 4040/8359 - Release Date: 10/10/14