As stock? An AM filter and keep it way up at the high end.
Carl
KM1H
----- Original Message -----
From: <k2dp@charter.net>
To: "Fuqua, Bill L" <wlfuqu00@uky.edu>; "Carl" <km1h@jeremy.mv.com>; "Rob
Atkinson" <ranchorobbo@gmail.com>
Cc: <amps@contesting.com>
Sent: Sunday, June 05, 2011 6:15 PM
Subject: Re: [Amps] FW: [Boatanchors] Best Boatanchor
160-10mReceiversforSSB?
> OM's,
>
> FWIW, the Collins 75A-4 covers 160 mtrs, what else would you ever need for
> 160 ?
>
> 73,
> Dave
> ----- Original Message -----
> From: "Fuqua, Bill L" <wlfuqu00@uky.edu>
> To: "Carl" <km1h@jeremy.mv.com>; "Rob Atkinson" <ranchorobbo@gmail.com>
> Cc: <amps@contesting.com>
> Sent: Sunday, June 05, 2011 4:48 PM
> Subject: Re: [Amps] FW: [Boatanchors] Best Boatanchor
> 160-10mReceiversforSSB?
>
>
>> You know, I have never tried the CE slicer.
>> How has had some experience with it?
>> I assume it is phaseing.
>> wa4lav
>>
>> ________________________________________
>> From: Carl [km1h@jeremy.mv.com]
>> Sent: Sunday, June 05, 2011 5:30 PM
>> To: Rob Atkinson; Fuqua, Bill L
>> Cc: amps@contesting.com
>> Subject: Re: [Amps] FW: [Boatanchors] Best Boatanchor
>> 160-10mReceiversforSSB?
>>
>> I paid $100-150 for the 3 of mine but Ive seen them over $400 on Fleabay.
>> The CE B Slicer and one from RME are others I use that cost a lot less.
>>
>> Carl
>> KM1H
>>
>>
>> ----- Original Message -----
>> From: "Rob Atkinson" <ranchorobbo@gmail.com>
>> To: "Fuqua, Bill L" <wlfuqu00@uky.edu>
>> Cc: <amps@contesting.com>
>> Sent: Sunday, June 05, 2011 4:15 PM
>> Subject: Re: [Amps] FW: [Boatanchors] Best Boatanchor
>> 160-10mReceiversforSSB?
>>
>>
>> Because I did not know they were going for that much. Where do you
>> see the high prices? under tables at flea markets?
>>
>> Rob
>> K5UJ
>>
>> On Sun, Jun 5, 2011 at 1:21 PM, Fuqua, Bill L <wlfuqu00@uky.edu> wrote:
>>> With HC10 going for more than receivers such as HQ180s and HQ170s why
>>> would you buy one?
>>> These have the same IF ans in the HC10.
>>> 73
>>> Bill wa4lav
>>>
>>> ________________________________________
>>> From: amps-bounces@contesting.com [amps-bounces@contesting.com] On
>>> Behalf
>>> Of Rob Atkinson [ranchorobbo@gmail.com]
>>> Sent: Sunday, June 05, 2011 1:40 PM
>>> To: amps@contesting.com
>>> Subject: Re: [Amps] FW: [Boatanchors] Best Boatanchor
>>> 160-10mReceiversforSSB?
>>>
>>> If you wind up with an old AM/CW rx with a 455 KHz IF you can keep a
>>> look out for a hammarlund HC-10 and it will give you SSB coverage and
>>> maintain the tube signal chain.
>>>
>>> I don't know what the prices are but RME might be a manufacturer to
>>> look for. I have seen NC300s go for pretty cheap so that is certainly
>>> a very good rx for the money and ya gotta love that weighted flywheel
>>> tuning.
>>>
>>> 73
>>>
>>> Rob
>>> K5UJ
>>> _______________________________________________
>>> Amps mailing list
>>> Amps@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/amps
>>>
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>>
>>
>> -----
>> No virus found in this message.
>> Checked by AVG - www.avg.com
>> Version: 10.0.1382 / Virus Database: 1511/3682 - Release Date: 06/05/11
>>
>>
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1382 / Virus Database: 1511/3683 - Release Date: 06/05/11
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|