Rich says:
>A caveat- If you disconnect the +110vdc PS from the bias contacts on the
>relay, a g/fil. shorted tube will not be able to melt down the (unfused)
filament
>transformer.
Is there a particular reason that this failure mode can exist E.g no fuse for
(false) economic reasons, or did it just happen that way - as things sometimes
do in designs?
73
Peter G3RZP
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|