Amps
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[AMPS] Plate load charts

from [Peter Chadwick] [Permanent Link][Original]
To: <amps@contesting.com>
Subject: [AMPS] Plate load charts
From: Peter_Chadwick@mitel.com (Peter Chadwick)
Date: Tue, 5 Jan 1999 13:41:29 -0000 
YO3CTK says

>Ten amps is the PEAK 

Whoops! Sorry, Mike is correct. 10amps pk is 7 amps rms so the losses are 87
watts. Still substantial.

I'm seriously considering silver soldering the taps on the tank coil -
that's with solder melting at redheat, not the lower melting point stuff for
ordinary soldering irons.

73

Peter G3RZP


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  [AMPS] Plate load charts, yo3ctk@qsl.net
Next by Date:  [AMPS] Plate load charts, Rich Measures
Previous by Thread:  [AMPS] Plate load charts, yo3ctk@qsl.net
Next by Thread:  [AMPS] Plate load charts, Rich Measures
Indexes:  [Date] [Thread] [Top] [All Lists]