[AMPS] Cantenna Dummy loads

To:	<amps@contesting.com>
Subject:	[AMPS] Cantenna Dummy loads
From:	Peter_Chadwick@mitel.com (Peter Chadwick)
Date:	Thu, 4 Feb 1999 14:54:34 -0000

>magnetic stirrer, with the spinner in
>the bottom of the Cantenna can.  

If the cantenna can is steel, this isn't going to work - the cantenna can
will act as a shield.

Water has a dielectric constant of 81, so any dimensioning for using oil may
well have a poor swr at VHF.

73

Peter G3RZP


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread]	Current Thread	[Next in Thread>
[AMPS] Cantenna Dummy loads, (continued) [AMPS] Cantenna Dummy loads, Rich Measures [AMPS] Cantenna Dummy loads, Gilmer, Mike [AMPS] Cantenna Dummy loads, William L. Fuqua III [AMPS] Cantenna Dummy loads, Jon Ogden [AMPS] Cantenna Dummy loads, Rich Measures [AMPS] Cantenna Dummy loads, Gilmer, Mike [AMPS] Cantenna Dummy loads, Mark S Graalman [AMPS] Cantenna Dummy loads, Paul Hicks, VE3BBH / VE3ZT [AMPS] Cantenna Dummy loads, Zdzislaw R Sawicki [AMPS] Cantenna Dummy loads, Peter Chadwick [AMPS] Cantenna Dummy loads, Peter Chadwick <= [AMPS] Cantenna Dummy loads, km1h@juno.com [AMPS] Cantenna Dummy loads, km1h@juno.com [AMPS] Cantenna Dummy loads, Peter Chadwick [AMPS] Cantenna Dummy Loads, Court [AMPS] Cantenna Dummy Loads, Phil T. (VE3OZZ) [AMPS] Cantenna Dummy Loads, km1h@juno.com

Previous by Date:	[AMPS] Fwd: Mail failure - HELP!!!!, Jon Ogden
Next by Date:	[AMPS] Fwd: Mail failure - HELP!!!!, Roy Koeppe
Previous by Thread:	[AMPS] Cantenna Dummy loads, Peter Chadwick
Next by Thread:	[AMPS] Cantenna Dummy loads, km1h@juno.com
Indexes:	[Date] [Thread] [Top] [All Lists]