Hi Dick,
Looks like one of your 3-500Z's is gassy & flashed over. In
addition to the added glitch resistor, be sure to check the .82 ohm, 1
watt resistor on the rectifier board. Any flashover usually takes out
that resistor.
As far as the added glitch resistor, my Ten Tec Centurion had
a similar sized resistor. I don't think the value is very critical.
73,
Bob
N2OAM
On 11/12/2016 8:52 PM, Dick NY1E wrote:
My SB220 stopped operating, with no plate current and pegging the grid meter
after a bright light out of the rear fan grill. It seems an added glitch
resistor opened, 10 ohm 10 watts doesn't seem big enough. did it do its job and
sacrifice itself? The resistor looks fine no burns or anything. Should it be
bigger or keep this size as a fuse?de Dick NY1E
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|