It's probably Teflon. Do an Ebay search on Teflon sheet. There are lots of
folks selling small quantities. Or check locally if you have a plastics
supplier locally. Easier and simpler to order it. Saves driving.
73
Jim W7RY
----- Original Message -----
From: "David Feldman" <wb0gaz@hotmail.com>
To: <amps@contesting.com>
Sent: Sunday, March 15, 2009 5:50 PM
Subject: [Amps] Slightly OT - Looking for source to replace
theteflon/plastic dielectric used in Nye Viking MB-V-A paddingcapacitors
>I know this is OT, but the amplifier was the cause of the probem, not the
> operator, I'm absolutely certain ;-) !!
>
> I'm repairing a MB-V-A tuner which had damage to one of the padding
> capacitors after KW into a very bad mismatch - small hole pierced in both
> pieces of the dielectric plastic used in one of the 170 pF padding
> capacitors.
>
> I've disassembled the capacitor assembly and need to find a source for the
> correct dielectric (teflon? plastic?) material so I can rebuild the
> capacitor. There are two different styles used - an opaque material in the
> 300 pF output coupling capacitor and transluscent material used in the
> other
> three 170 pF output coupling capacitors; the type I'm seeking is the
> transluscent material (or the actual correct replacement part, but the nye
> viking web site doesn't make mention of the tuner, only keys and paddles.)
>
> Thanks for any pointers,
>
> 73 Dave WB0GAZ wb0gaz@hotmail.com
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
--------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.0.237 / Virus Database: 270.11.13/1999 - Release Date: 03/13/09
05:59:00
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|