Yes, as said before, I use 5/8" Cellflex (LCF58-50)by RFS on 144MHz around
the rotator. The Andrew type will be LD4.5-50.
73
Peter
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of donroden@hiwaay.net
Sent: Dienstag, 26. April 2011 00:36
To: amps@contesting.com
Subject: Re: [Amps] DIN vs N
I think the plain ole PL259 due to more contact area will handle more AMPS
than a type N at 6M and below.
But again, is there a larger cable than 213 for rotor duty ?
Don W4DNR
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|