4CX5000A's grid dissipation is 75W, not too weak.8877's grid dissipation
only 25W, but often handle over 100W driving power.
If the grid rigged enough, many tentrode can work in GG well , like 813,
GU-81M ,4-400 etc.
-----原始邮件-----
From: Fuqua, Bill L
Sent: Tuesday, March 18, 2014 1:58 PM
To: Hsu ; amps@contesting.com ; ham_amplifiers@yahoogroups.com
Subject: RE: [Amps] 4CX5000A in grounded-grid
This type of tube usually doesn't do well in zero bias grounded grid.
Usually the control grid is fried due to excessive control grid current.
But if he is only turning out 1kW then the drive must be low. Also, his
plate voltage for this tube is low compared to normal operation.
The high Q tank, 130kHz bandwidth, must be unloaded during test. That
is a Q of 100. The plate resistance will drop that.
I have 2 old MRI 200MHz 4CX5000a amplifiers in the garage.
Could not resist them at a UK auction.
73
Bill wa4lav
________________________________________
From: Amps [amps-bounces@contesting.com] on behalf of Hsu
[hsu4qro@gmail.com]
Sent: Tuesday, March 18, 2014 1:32 AM
To: amps@contesting.com; ham_amplifiers@yahoogroups.com
Subject: [Amps] 4CX5000A in grounded-grid
Found a interesting web about 4CX5000A(8170) 2m VHF GG power amplifier,
http://www.g4ftc.co.uk/amplifiers/8170_2m/home.htm Anyone use this
configurtion in HF ?how many power gain？
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|