Amps
[Top] [All Lists]

Re: [Amps] Alpha 77 160 meter plate choke

To: "Paul Christensen" <w9ac@arrl.net>, <amps@contesting.com>
Subject: Re: [Amps] Alpha 77 160 meter plate choke
From: "Carl" <km1h@jeremy.mv.com>
Date: Mon, 24 Mar 2014 21:04:56 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
The RFP RFC-3 is the Ameritron for $5 more

The 77DX started with the B&W 800 and then the 801 to improve 160 once people started getting serious about the band.
Later the 802 was used by many to allow WARC's.

Ive used the Ameritron in several 77DX and SX after the final tapered design proved reliable. Another that looks similar and goes back to the 80's is the one in the TL-922/922A; Ive used several of those that were removed during 6M conversions.

AFIK is was one of the senior tech guys at the ARRL that came up with that concept back in the 70's or so.

Carl
KM1H




----- Original Message ----- From: "Paul Christensen" <w9ac@arrl.net>
To: <amps@contesting.com>
Sent: Monday, March 24, 2014 4:46 PM
Subject: Re: [Amps] Alpha 77 160 meter plate choke


Tree,

You may want to check for any in-band resonances if you haven't already. In my 77Dx, I've also added additional C from +HV to ground. For the upcoming 77D project, the plan is to discard the B&W 801 choke and replace it with an RF Parts RFC-3. This choke should provide ample 160m inductance and is stagger-wound to minimize or eliminate in-band resonance but needs to be validated after installation. Specs are: 1.5A, 225 uH, 4 KV max.

Paul, W9AC


---- Original Message ----- From: "Tree" <tree@kkn.net>
To: <amps@contesting.com>
Sent: Monday, March 24, 2014 2:17 PM
Subject: [Amps] Alpha 77 160 meter plate choke


All -

I have made a mod to my Alpha 77 to add about 60 uH to the RF plate choke
when on 160 meters. I originally was going to mount a switch to control a
HV relay - but came up with a better solution.  If you are interested in
knowing more - check out the pictures here:

http://www.kkn.net/n6tr/directories.html

Look under Alpha 77Dx. The relay was purchased from Henry Radio. It has a 26.5 volt coil which seems to work just fine off of the +24 volt regulated
power in the amp.

I added a 4700 pf 6KV cap from the HV to ground which you can see in the
pictures.

I am not sure this makes a big difference - but I certainly feel better
about using the amp on 160 with this mod.

73 Tree N6TR
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps


-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4354 / Virus Database: 3722/7241 - Release Date: 03/24/14


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>