Amps
[Top] [All Lists]

Re: [Amps] Adjustable Regulated Screen Supply.

To: <amradio@mailman.qth.net>, <boatanchors@mailman.qth.net>, <amps@contesting.com>, "Paul Baldock" <paul@paulbaldock.com>
Subject: Re: [Amps] Adjustable Regulated Screen Supply.
From: "Carl" <km1h@jeremy.qozzy.com>
Date: Tue, 8 Mar 2016 21:33:09 -0500
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Im not familiar with that name but I have an Oregon version that goes to 400V and gets its share of use.

Another Oregon with a single 6146 goes 0-400V regulated and to 450V unregulated plus a 0-150V bias supply.

There was likely a decent market in those days for a quality lab bench supply.

Carl

----- Original Message ----- From: "Paul Baldock" <paul@paulbaldock.com> To: <amradio@mailman.qth.net>; <boatanchors@mailman.qth.net>; <amps@contesting.com>
Sent: Tuesday, March 08, 2016 3:51 PM
Subject: [Amps] Adjustable Regulated Screen Supply.



I have acquired a commercially made adjustable regulated screen supply. It uses 2 x 6146s in parallel as a series regulator. It supplies 175mA from 225-325 Volts.

The serial number label says Trans Electronics, a Division of Burton Mfg of California.. It is labeled Model RSL 317. However the back of the schematic says A-100, and has a manufacturing date of 6-25-66 written on it. It looks brand new and may never have been used, but test perfectly with excellent regulation from no load to full load.

Is anybody familiar with this company or power supply?

- Paul  KW7Y


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps


-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2015.0.6189 / Virus Database: 4540/11777 - Release Date: 03/08/16


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>