Amps
[Top] [All Lists]

Re: [Amps] QRO HF-2500DX on 10.1 MHz (Proper title!)

To: amps@contesting.com, Paul M Dunphy <amplifier@ve1dx.net>
Subject: Re: [Amps] QRO HF-2500DX on 10.1 MHz (Proper title!)
From: Hector Garcia XE2K <j_hector_garcia@sbcglobal.net>
Reply-to: j_hector_garcia@sbcglobal.net
Date: Sun, 1 Mar 2009 19:30:18 -0800 (PST)
List-post: <amps@contesting.com">mailto:amps@contesting.com>
the amp  produce  a few watts but  gets very warm , will not recommend it,  try 
it when get mine on the dummy Load  because  have the doubt why on the web page 
claim will not work on 30m, using the 7mhz position was  in fault several times 
and  was very warm, no more that a few tries where produce 400w and stop that 
test, too much risk  and not a  real need. NO power? , bigger antenna is the 
solution.



J. Hector Garcia XE2K / WT6J

   Mexicali B.C  DM22fp

P.O.Box 73 

El Centro CA 92244-0073

USA

http://www.xe2k.net

http://www.dxxe.org

--- On Sat, 2/28/09, Paul M Dunphy <amplifier@ve1dx.net> wrote:
From: Paul M Dunphy <amplifier@ve1dx.net>
Subject: [Amps] QRO HF-2500DX on 10.1 MHz (Proper title!)
To: amps@contesting.com
Date: Saturday, February 28, 2009, 4:52 PM

     Does anyone know if a QRO HF-2500DX works (or can easily be made 
to work) on 30M?

73, Paul VE1DX

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>