Take a look at the photos of my amplifiers. This is how I did the exact
system you are talking about.
http://s900.photobucket.com/albums/ac206/w7ry/
73
Jim W7RY
--------------------------------------------------
From: "Ulf (SM0NOR)" <ulf@sm0nor.com>
Sent: Sunday, January 30, 2011 11:51 PM
To: "Amps reflector" <amps@contesting.com>
Subject: [Amps] looking for idea on switching arrangment
> Hi all,
>
> I'm looking for some suggestions on how to switch input together with
> output. I plan on using relays for the input so mechanical alignment is
> not a big issue. But I still have to switch DC control voltages. I have a
> salvaged Centralab band-switch (from an SB230, I think) to which I would
> like to attach another switch for the control voltages. I thought it would
> be easy to find an open design switch with a shaft that runs through the
> switch. But after searching around I came up with nothing. Most modern
> switches tend to be encapsulated.
>
> Suggestions?
>
>
> 73's
>
> Ulf (SM0NOR)
> ulf@sm0nor.com
>
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1204 / Virus Database: 1435/3413 - Release Date: 01/30/11
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|