>From several discussions on the air Ive listened to and on other forums it
is far from a perfect solution in a real world enviroment.
What works in a lab doesnt mean its good elsewhere.
Carl
KM1H
----- Original Message -----
From: "Jim Brown" <jim@audiosystemsgroup.com>
To: <amps@contesting.com>
Sent: Friday, September 23, 2011 9:50 PM
Subject: Re: [Amps] RF in the Audio
> On 9/23/2011 6:03 PM, Rob Atkinson wrote:
>> You don't wind your balanced feed on a torroid for crying out loud, a
>> method I find preposterous, and probably subject to heating and loss;
>
> You may not have heard about the concept, but it works quite well. DX
> Engineering has done similar things, but don't publish it. I've done
> considerable work on the topic, and published both the theoretical basis
> and the measured data. Since I've done that in the tutorial, and because
> this reflector is about power amps, I won't repeat the discussion. If
> you open up some of their boxes you can see what they're doing.
>
> 73, Jim Brown K9YC
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1410 / Virus Database: 1520/3915 - Release Date: 09/23/11
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|