Thats a perfectly normal result as the 4-400's have less gain in GG.
Im assuming the grids are also now directly grounded.
Reduce the bias a bit and shoot for about 200ma idle for decent IMD. Replace
the zener with reverse connected 1N5408's, about 4 should do it and anything
between 180-220ma idle is fine.
Nobody will hear the 200W less and the result is a cooler running amp.
Carl
KM1H
Carl
KM1H
----- Original Message -----
From: "John King" <k5pgw@yahoo.com>
To: <amps@contesting.com>
Sent: Sunday, December 04, 2011 4:20 PM
Subject: [Amps] Replacing 3-500Z tubes with 4-400A tubes
>I have several very good 4-400 A tubes and have replaced a pair of bad
>3-500Z tubes with a pair of 4-400A tubes in a Heath SB 220 amp.
>
> I have noticed much lower resting current being drawn when keyed up. I
> have noticed about 200 watts less power output with 100 watts drive. The
> 4-400A tubes are as new.
>
> I made no changes to bias or other parameter adjustment. I would
> appreciate the benefit of your knowledge and experience regarding the tube
> substitution. Thanks and 73, John, K5PGW
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1411 / Virus Database: 2102/4057 - Release Date: 12/04/11
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|