I know cyanide is used in gold plate solution but not aware of it silver
plating.
It seems that silver chloride is the main ingredient.
73
Bill wa4lav
________________________________________
From: Amps [amps-bounces@contesting.com] on behalf of Dick Hanson
[dick@dkhanson.com]
Sent: Friday, February 28, 2014 1:32 PM
To: 'Hardy Landskov'
Cc: Amps Reflector
Subject: Re: [Amps] Cool Amp Silver Plating
Hardy....
I have used cool amp, but switched to SilverSmith.
There are two versions: commercial version which contains cyanide and is
faster/better, and then the consumer version which has no cyanide.
I've not used the non-cyanide version, so can't comment on how well it
works.
I can say that the commercial/business version is excellent; fast, easy to
apply and very effective.
Good luck, amigo,
Dick, K5AND
-----Original Message-----
From: Amps [mailto:amps-bounces@contesting.com] On Behalf Of Hardy Landskov
Sent: Friday, February 28, 2014 8:43
To: amps@contesting.com
Subject: [Amps] Cool Amp Silver Plating
All,
Has anyone used this power? If so, what is your opinion/facts of how your
project turned out? Any special precautions needed?
Thanks ahead of time.
73 Hardy N7RT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|