Ummm...
Won't a SINGLE 4-1000A amp properly designed, and using relatively high(er)
voltage on the plate, easily run full Amateur
legal limit on 160 through 10? In every mode, except perhaps 100 percent
duty cycle modes like RTTY?
Save yourself some money, and design for a single tube....
I think at 10 meters, the stray capacitance at the plate, makes proper Pi Net
design easier if you have a single tube, to keep
the C1 values practical.
I have heard of CBers using pairs, or even quad setup of 4.1000As, but that is
another story.
Merry Christmas...
All the Best, 73,
Pat Barthelow aa6eg@hotmail.com
http://www.jamesburgdish.org
Subscribe: http://bambi.net/jamesburg.html
Jamesburg Earth Station Moon Bounce Team
> Date: Sat, 22 Dec 2007 12:58:35 -0500
> From: videorov@verizon.net
> To: amps@contesting.com
> Subject: [Amps] What is the best way to run a pair of 4-1000 tubes grounded
> Grid or another way? For 10 thru 160
>
>
> http://www.hamradioclassifieds.com
> List Your Equipment with Pictures.
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|