My footswitch is made by Heil (I believe). It has two separate leads for PTT
keying: one for the rig and one for the amp. The amp is keyed first, then the
rig, to avoid hot switching. Seems like a good design for a footswitch.
Mike K6MDS
>>> Yes, we use foot switches on SSB. This has not been a problem for hot>>>
>>> switching for us. There is a small delay from when PTT is actuated in >>>
>>> the>>> radio and when RF production starts, so we are all OK.>>>>>> 73,>>>
>>> Tim K3LR
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|