------------ ORIGINAL MESSAGE ------------(may be snipped)
On Thu, 30 Jul 2015 17:43:00 -0700, you wrote:
>
>I'm tentatively thinking about 23 turns of #10 bare or enameled copper,
>3-in diameter, about 5.3-in long. That works out to about 4.5 turns/in.
>
>Suggestions?
>
>73, Jim K9YC
REPLY:
Go with that. Your 1650 volts is divided across 23 turns, so each turn
only sees about 71 volts to the adjacent turns. And #10 wire is plenty
large enough for 3.5 amps, even allowing for skin effect.
73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|