Thats high but not unheard of on a 120V line as it depends on the total
length from the breaker.
Since 240V is a simple process, go for it. Drop should be around 350V
then.
Id also check the filter caps to be sure they have formed properly, even
NOS deterioates. Use the amp for about 1/2 hour and then shut off, pull
plug and discharge the HV. Feel the caps, they should be barely warm to
the touch.
Carl
KM1H
----- Original Message -----
From: "Ken Bessler" <kg0wx@hotmail.com>
To: <amps@contesting.com>
Sent: Sunday, September 14, 2008 8:09 PM
Subject: [Amps] 234v - to convert or not?
>
> I just picked up a NOS Yaesu FL-2100B. I used to own a TL-922A and for
> that I
> installed a dedicated 234v line in the shack. My 117v lines are a
> little crowded
> so I was thinking about converting the FL-2100B to 234v to use the
> line that the
> TL-922A used to use.
>
> When I key the new amp, the plate voltage drops from 2,350vdc to about
> 1,800vdc
> with the current 117v stock setup. I'm worried about the drop.
>
> So, should I convert the Yaesu to 234v operation? It would not be that
> hard for me
> skills wise and like I said, I *do* have the outlet......
>
> Ken KG0WX
>
> 73 de Ken KG0WX - Kadiddlehopper #11808,
> Flying Pigs #-1055, Grid EM17ip
>
> _________________________________________________________________
> Get more out of the Web. Learn 10 hidden secrets of Windows Live.
> http://windowslive.com/connect/post/jamiethomson.spaces.live.com-Blog-cns!550F681DAD532637!5295.entry?ocid=TXT_TAGLM_WL_domore_092008
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|