I usually unsolder some old HC-6/U Xtal and use that.
73, Dick, W1KSZ
On Sun, Aug 11, 2013 at 9:31 AM, Dave Gow <d.gow@frontier.com> wrote:
> I believe it is the same as the plugs Johnson used on the Viking Valiant
> and
> Ranger transmitters. Replicas are available from several vendors that
> serve
> users of these fine old AM transmitters. I have several I bought on for
> less than $10. They are usually made from FT-243 crystal sockets.
> -----Original Message-----
> From: Amps [mailto:amps-bounces@contesting.com] On Behalf Of
> hrd998cc@yahoo.com
> Sent: 08 August, 2013 8:37 PM
> To: TexasRF@aol.com
> Cc: amps@contesting.com
> Subject: Re: [Amps] L4B connector
>
> If you find one, Please let me know where you found it. I need one for my
> L4B as well.
>
> Thanks, Russ
> KW6T
>
> Sent from my iPhone
>
> On Aug 7, 2013, at 1:00 PM, TexasRF@aol.com wrote:
>
> > The new Harbach filter board is installed and working. Now looking for
> > a 2 pin connector to mate with the rear panel relay keying socket.
> >
> > Any tips out there for a source?
> >
> > Tanks/73,
> > Gerald K5GW
> >
> >
> > _______________________________________________
> > Amps mailing list
> > Amps@contesting.com
> > http://lists.contesting.com/mailman/listinfo/amps
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|