Colin and all,
Tnx for the all inputs.
I am not sure that the B+ was not there when I tried to tune the amp. Soon
I'll do some checks with an ohm meter to see what I can learn. Once I
install a new plate choke, I will remove the tubes and and see what
happens. I'll also will check the tubes for shorts and opens, and if
necessary try to find a hi-pot tester somewhere in the Phoenix area. As a
last resort, I will ship them off for testing.
N1FK sent a link to: "Tech notes on the Titan 425 Amp". Its quite long with
alot of details, I'll will spend some time digesting it.
I'll keep the group informed.
Tnx again for the comments and suggestions.
Ray,
N6VR
On Wed, Jun 13, 2012 at 6:03 PM, k7fm <k7fm@teleport.com> wrote:
> Hi Ray:
>
> As you have already heard, the grid of the 3CX800A7 cannot handle much
> power. I think they will handle less than a watt. So, if the plate
> voltage is lost, all the power is dissipated in the grid. You may have
> wasted the grids. Once it is working, you may want to install a
> modification to include a grid protection circuit.
>
> 73, Colin K7FM
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|