I used to have a catalog that described how to slow blowers and it depended
on the type of motor. One type you can use a resistor in line, the other
type requires the use of an ac capacitor in-line.
73, Roger
W7TZ
CN83ia
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
Virus-free.
www.avg.com
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
On Thu, Jan 27, 2022 at 7:03 AM Byron Tatum <bjtatum1@att.net> wrote:
> Thanks Guys- I appreciate all the suggestions on repairing my blowers.
> The units I have are Kooltronics KBB47-5 with a motor #7162-0802. This
> motor is 3400 RPM at 60 Hz. I am looking for a lower speed motor as this
> blower is excessively noisy and I can get by with less airflow in SSB/CW
> service. I need to stay with my existing housings as I cannot find any
> replacements that have same bolt hole pattern (2-5/8" square) or flange
> dimensions (3-1/4" square). What happens to these motors if I reduce the
> voltage to slow them? Or, do they work this way, in other words is the
> frequency of AC what should be varied? Say I was to lower AC voltage to 60
> or 70 VAC, will the motor be negatively affected?Thanks,Byron W5FH
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|