There is the Quencharc but they are pricey. Just make your own using 630wvdc
poly caps and 1/2 watt resistors.
Give me a load you are working with and I can point you in right direction
for calulating values.
Paul K0UYA
----- Original Message -----
From: "Tim Duffy K3LR" <k3lr@k3lr.com>
To: "'Alex Eban'" <alexeban@gmail.com>; "'AMPS'" <amps@contesting.com>;
"John Lyles" <jtml@losalamos.com>
Sent: Thursday, January 29, 2009 1:19 AM
Subject: Re: [Amps] Crydom Solid State Relays
> Is there a suggested Mouser available "snubber" capacitor R/C combo that
> has
> worked well?
>
> Maybe you or John know the correct part for us?
>
> Thanks
> 73,
> Tim K3LR
>
> -----Original Message-----
> From: Alex Eban [mailto:alexeban@gmail.com]
> Sent: Thursday, January 29, 2009 1:10 AM
> To: k3lr@k3lr.com
> Subject: RE: [Amps] Crydom Solid State Relays
>
> ...the Crydoms are "quieted" inside, so they don't need RFI protection!
> However, I would warmly recommend to include a snubbing capacitor across
> the
> power pins just like you do with regular relays.
> This is meant to prevent switching transients from "roasting" the power
> section of the relay.
> Alex 4Z5KS
>
> -----Original Message-----
> From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
> Behalf Of Tim Duffy K3LR
> Sent: Thursday, January 29, 2009 7:27 AM
> To: 'Bob Maser'; 'AMPS'
> Subject: Re: [Amps] Crydom Solid State Relays
>
> Hi Bob:
>
> I have used Crydom SSR relays in AC ON and step start circuits for 15
> years
> with no special bypassing. No problems at all with this set up.
>
> 73,
> Tim K3LR
> http://www.k3lr.com
>
>
> -----Original Message-----
> From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
> Behalf Of Bob Maser
> Sent: Wednesday, January 28, 2009 7:08 PM
> To: AMPS
> Subject: [Amps] Crydom Solid State Relays
>
> The power supply of my new amplifier will be using 3 40A Crydom SSR
> relays,
> One on each leg of the 240VAC and another in one leg to short out the step
> start resistor. I have been planning on using the SSR's w/o any resistors
> or capacitors across the control connections but I have been advised that
> I
> should put resistors and capacitors across the control connectors to
> prevent
>
> RF from affecting the SSR function and possibly causing "chatter". I
> would
>
> appreciate some feedback from the group. I don't believe that Jerry
> Pittenger K8RA used anything in the 3CX1500D7 amp that was featured in the
> 2006 ARRL Handbook.
>
> Bob Maser W6TR
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> No virus found in this incoming message.
> Checked by AVG - http://www.avg.com
> Version: 8.0.176 / Virus Database: 270.10.15/1922 - Release Date:
> 1/28/2009
> 7:24 PM
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|