And thats why im going this route ...I have a Yokagawa P9306UL that i pressed
into ameture radio service with only minor issues really. Then one of the
3-500Z (emiac lot from 87) started shorting to cathode after power up - now is
constant - and needed replaced. The cost of 2 3-500z compared to one GS-35b
leads to the thought of using a Russian tube. Seeing tht the GS-35b is almost
one inch taller im not sure that i can fit it into the compartment that the
pair of 3-500z were in. Probably some case cutting will be in order. I will get
the calipers out and take some measurements.
Other thoughts are using some Russian Tetrodes and just ground the screens ...
might not work out - i read somewhere some time ago that this might be a way to
go due to cost.
Mike
KC7NOA
>
> A lot of people here in Europe have built amps with the GS35B and I hear
> reports of reliable operation with 4kv on the anode.
>
> As Richard alludes, we're experimenters and if things go *BANG* occasionally
> it's no big deal, especially with $100 Russian tubes. I might find that the
> cost/benefit works out differently with a $1000 Eimac tube, though....
>
> cheers
>
> Dave G0OIL
>
SNIP
> From: RICHARD GEORGE <k6kwq@msn.com>
> Subject: Re: [Amps] Russian Power Tubes
> To: dezrat1242@yahoo.com, "amps fourm" <amps@contesting.com>
> Date: Wednesday, 16 December, 2009, 1:49
>
> Funny thing I worked as an engineer for 42 years.
> This is ham radio not space shuttle engineereing.
>
> K6KWQ Dick
> Amps by "MORE POWER"
SNIP
>
>
> ORIGINAL MESSAGE:
>
> On Tue, 15 Dec 2009 13:03:33 -0800, "RICHARD GEORGE"
> <k6kwq@msn.com<mailto:k6kwq@msn.com>> wrote:
>
> >
> >The GS-35B will run for ever at 4KV with no problems. I have built dozens
> of amps for VHF and UHF using this tube and running 4KV+ on the anode.
>
SNIP
Hotmail: Trusted email with Microsoft’s powerful SPAM protection. Sign up now.
_________________________________________________________________
Hotmail: Free, trusted and rich email service.
http://clk.atdmt.com/GBL/go/171222984/direct/01/
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|