> Hi all:
>
> Got my 813 parts rig.
> The PS has two " Semtech SA 7477 " rectifiers.
> Black metal tube with pix of diode on it...top metal cap.
>
> Might anyone have data on it?
>
> //"SA" means "special assembly," and it's an arbitrary number issued in
> sequence; so, SA7477 is #7477 in a long line of special assemblies. There
> is no published data for special assemblies, since they are manufactured
> to order for OEMs.
>
> How to check them?
>
> Should I use them ...or replace with something else?
>
> //Based on your description, sounds like a rectifier tube replacement.
> Does it have a tube base (pins) on one end, and an anode cap on the other?
> If so, it's a tube replacement. Normally these silicon rectifier
> replacements don't go bad (or at least not with "age"), so unless there
> was a fault down line (like a short circuit), they're probably okay.
> -WB2WIK/6
>
> Tnx,
> Steve
> WA2TAK
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|