Id certainly replace the caps and the HV metering resistors at a minimum.
There are likely other parts that need replacing such as resistors and caps
on the PC board.
Carl
KM1H
----- Original Message -----
From: "Steve London" <n2icarrl@gmail.com>
To: <amps@contesting.com>
Sent: Sunday, February 05, 2012 2:02 PM
Subject: [Amps] Alpha 76 Hypersil HV question
>I have two Alpha 76's, both 3-tubers. One has the standard transformer, the
> other hypersil. Compared to the standard transformer 76, the HV on the
> hypersil
> 76 seems low - About 2150-2200 volts in standby, and 1700 volts @ 1500
> watts
> output. What are others seeing ? The capacitors are the original no-name,
> 180
> uf, 450 volt variety. Should I be looking at replacing them for increased
> HV ?
>
> 73,
> Steve, N2IC
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1424 / Virus Database: 2112/4790 - Release Date: 02/05/12
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|