Amps
[Top] [All Lists]

Re: [Amps] RF on audio using 374A

To: "Carl" <km1h@jeremy.mv.com>, <jim@audiosystemsgroup.com>
Subject: Re: [Amps] RF on audio using 374A
From: "kc0hfl" <kc0hfl@cox.net>
Date: Wed, 14 Sep 2011 20:02:03 -0500
List-post: <amps@contesting.com">mailto:amps@contesting.com>
I am now convinced the problem is within the Alpha I sent this earlier but 
it never made it to everyone. A question was asked about which mic connector 
I am using with the Flex and it is the front connecter.

 Okay I did the choke thing last night spent about 4 hours testing here is
 how it went. Ferrite on the Mic line right at the socket same for the
 speakers the power cord has ferrite on them as well cable from computer to
 flex has them on both ends no luck still having issues. So into the dummy
 load with the Alpha I have distortion that sounds like RF on the audio I
 do not feel it is an RF problem I have had several operators describe what
 they are hearing and I guess it got me chasing RF in the shack. I swapped
 amps again with my MLA 2500 and it works perfect just like the SB220 I
 even wheeled over my 2X4-1000 and good clean audio. I guess I have been
 chasing my tail I was convinced it was RF getting back down the feedline
 or in the shack - Now what could be wrong with the amp? Very frustrating
> more to follow.

Bob, kc0hfl

----- Original Message ----- 
From: "Carl" <km1h@jeremy.mv.com>
To: <jim@audiosystemsgroup.com>
Cc: <amps@contesting.com>
Sent: Wednesday, September 14, 2011 7:40 PM
Subject: Re: [Amps] RF on audio using 374A


>
> ----- Original Message ----- 
> From: "Jim Brown" <jim@audiosystemsgroup.com>
> Cc: <amps@contesting.com>
> Sent: Wednesday, September 14, 2011 4:34 PM
> Subject: Re: [Amps] RF on audio using 374A
>
>
>> On 9/14/2011 11:00 AM, Carl wrote:
>>> IMO Pin 1 is overblown (as are parasitics by another individual) and I
>>> would expect any of the radio manufacturers to already be aware of it.
>>
>> You would likely change your mind (assuming it is still open for change)
>> if you took the time to read the extensive documentation of it, some of
>> which is on my website. It is a very clear concept, easily grasped by
>> those with even the most minimal engineering education. EMC authority
>> Henry Ott has included a discussion of it in the latest edition of his
>> classic text on EMC.
>>
>> > 73, Jim K9YC
>
> Ive read enough to be almost permanently bored regarding your rather
> constant promomotion of that web site.
> However I always keep an open mind, something I learned decades ago when
> taking law courses.
>
> I'll suggest you read Pierce v. Delamater, a case in the NY Court of 
> Appeals
> for September 1847.
>
> Carl
> KM1H
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>