Hi Robert,
Sorry I've never tried to remote my setup.
Wouldn't you also need some sort of software like Go To My PC to get your home
PC to work from McDonald's?
But I would think the Acom remote device would be key to success.
Best of luck finding your solution,
73 Darrell AB2E
________________________________
From: Robert <woodr90@gmail.com>
Sent: Monday, August 3, 2020 1:38 AM
To: 'AB2E Darrell' <ab2e@hotmail.com>; amps@contesting.com <amps@contesting.com>
Subject: RE: [Amps] ACOM Director software
this would be the setup
Acom to K3
K3 is “wired” to desktop / writelog
Writelog / writelog remote
the Original RCU & there is RS232 port beside it’s connection on back of amp.
Key question is on/off from outside the router.
as example, I load Acom Director on my laptop.
Go to McDonald’s free wifi, bring up Acom Director
I’d think something loads on the machine at the rig/amp
I’ve just downloaded Acom Director – so I’m at zero on that learning curve…
W5AJ
Robert
Midland, Texas
From: AB2E Darrell [mailto:ab2e@hotmail.com]
Sent: Sunday, August 02, 2020 10:07 PM
To: Robert <woodr90@gmail.com>; amps@contesting.com
Subject: Re: [Amps] ACOM Director software
Robert,
Let me ask you, do you also use contest software such as N1MM+?
The Acom Director has the nicest looking interface (duplicate of the original
RCU face).
I have had it working standalone, however, at this time you can't interface it
with N1MM+ (although he claims a future version will have that).
There are two other solutions that work great...full control of Acom and both
interface as well with N1MM+ and other software.
TRX-Manager has a total control interface a lot like Acom Director, except it
is not fancy graphics. But you can monitor all functions and select them from
the TRX-Acom half of the program. You can download it and try it for free.
It uses the same 3 wire null modem cable from the RS-232 port on the back of
the Acom 2000A.
Likewise N4PY's software totally supports Acom 2000 interface and N1MM as well.
I'm assuming you have the original RCU, these are the best solutions for the
original RCU.
73 Darrell AB2E
________________________________
From: Amps <amps-bounces@contesting.com<mailto:amps-bounces@contesting.com>> on
behalf of Robert <woodr90@gmail.com<mailto:woodr90@gmail.com>>
Sent: Sunday, August 2, 2020 10:53 PM
To: amps@contesting.com<mailto:amps@contesting.com>
<amps@contesting.com<mailto:amps@contesting.com>>
Subject: [Amps] ACOM Director software
The ACOM 2000 has RS232 port on back
Control software program is available from M0YOM
Anyone have experience with this method?
can it do remote on/off - aka from other side of router via internet?
Thanks
W5AJ
Robert
Midland, Texas
_______________________________________________
Amps mailing list
Amps@contesting.com<mailto:Amps@contesting.com>
http://lists.contesting.com/mailman/listinfo/amps
[https://ipmcdn.avast.com/images/icons/icon-envelope-tick-green-avg-v1.png]<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
Virus-free.
www.avg.com<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|
