Harald LB2HG/AA4NX Garberg-Gule wrote:
I have a working but leaking oil filled capacitor, HEC 21052 CC602 6UF
8Kv DC used in my Henry 8K Ultra (3 Phase 230V). The oil comes out at
on the top of the canister under one of the HV connectors.
I wonder if there is a way I can repair it or I have to get a new one ?
During testing at drive levels around 100 Watt it has behaved well ...
however with some minor oil spill.
I have sealed up a few by: 1. moping up dry, 2. wiping the entire
top dry with 100% isopropyl alcohol or lacquer thinner without pressing
down on the top, 3. without touching the top inject a fillet around the
insulator at the top [½ wide at the hypotenuse] with (RED) high
temperature silicone sealer, let set up without disturbing
--
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|