Jim, thanks for your reply, however my goal is to see what can be
done with those low cost chassis mount resistors. The non-inductive
one's (or special thickfilm resistor) are much more expensive....
So,
I was hoping that someone had taken some data for those low cost ones?
In the meantime I did take some crude RF measurements and two 100 Ohm
50W resistors in parallel gave a 1:1.2 SWR (-20dB RL) at 2 MHz. That is
encouraging...but before I order a massive amount I would like to limit
the risk a bit more...
73's Carel.
On Sun, 17 Apr 2011 18:14:31
-0700, Jim W7RY wrote:
> There are LOTS of non inductive resistors out
there (thick film etc)!
> Consult the Mouser catalog. Download a Mouser
catalog at
>
> www.mouser.com [6]
> 73
> Jim W7RY
>
>
--------------------------------------------------
> From: "pc5m, Carel"
> Sent: Saturday, April 16, 2011 8:37 AM
> To:
> Subject: [Amps]
wirewound resistor inductance/capacitance parameters
>
>> Hi, Was
wondering if someone had some RF data (inductance/capacitance, or even
better a spice model..) of the general available low cost aluminum
housed high power (e.g. 50W) resistors for chassis mount? Example are
the Vishay NH series ( http://www.vishay.com/docs/30201/30201.pdf [2])
but also Welwyn and Ohmite run comparable products. Goal would be to
construct some high-power (kW's) dummy oad for 160mtrs (so only
reasonable well reflectionloss needed till 2 MHz..). Did google a bit
but didn't found anything useful. Thanks in advance, Carel
_______________________________________________ Amps mailing list
Amps@contesting.com [3]
http://lists.contesting.com/mailman/listinfo/amps [4] ----- No virus
found in this message. Checked by AVG - www.avg.com [5] Version:
10.0.1321 / Virus Database: 1500/3579 - Release Date: 04/17/11
Links:
------
[1] http://www.vishay.com/docs/30201/30201.pdf
[2]
http://www.vishay.com/docs/30201/30201.pdf
[3]
mailto:Amps@contesting.com
[4]
http://lists.contesting.com/mailman/listinfo/amps
[5]
http://www.avg.com
[6] http://www.mouser.com
[7]
mailto:pc5m@xs4all.nl
[8] mailto:Amps@contesting.com
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|