Re: [Amps] caps across rectifier diodes

[ToddRoberts2001@aol.com]

Back when I first started building some low power transmitters
I always seemed to notice a slight hum or buzz superimposed on the
carrier until I bypassed the power supply diodes with .01 caps across
each diode. I also seemed to notice RF getting into the AC house
wiring that was also cured by adding .01 caps across each rectifier.
 
Likewise I have run across some solid state and tube receivers that had a  
buzz
superimposed on reception especially at lower frequencies. The buzz  was
cured when .01 caps were added across the power supply diodes.
 
73 Todd WD4NGG
**************A Good Credit Score is 700 or Above. See yours in just 2 easy 
steps! 
(http://pr.atwola.com/promoclk/100126575x1219957551x1201325337/aol?redir=http:%2F%2Fwww.freecreditreport.com%2Fpm%2Fdefault.aspx%3Fsc%3D668072%26hmpgID
%3D62%26bcd%3DfebemailfooterNO62)
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps